-
8 Color(DAY&NIGHT)mode is not working. -
* Check the Day/Night Mode. Set to Auto or Color. -
7 The Motion Detection function is not working. -
* Check if " MOTION DETECTION" mode is turned on.
* Check the setting of the MD AREA -
6 Colors are not quite right. -
* Check the " WHITE BAL." setting. -
5 Nothing appears on the screen. -
* Check the power connection.
* Check the video signal line connection
* Check and make sure that the auto lens switch is correctly set to DC or VIDEO depending on the
type of lens attached. -
4 The video image is not clear. -
* Make sure the lens is clean. clean the lens with a clean lint free cloth or brush.
* Adjust the contrast control on the monitor.
* Make sure that the screen is not exposed directly to a bright light. Re-position the camera if necessary.
* Re-adjust the back focus of the camera. -
3 The screen is dark. -
* Adjust the contrast control of the monitor.
* If you have an intermediate device,set the 75Ω/Hi-z correctly, and also check the connections.
* Check if an auto iris lens is being used and if necessary adjust the brightness level. -
2 There is a problem with the camera operation. the camera surface is too hot and black stripes appear on the screen. -
* Check if an appropriate power source to the camera complies with the manufacturer's standard requirement,or if the voltage is fluctuating. Check for ground loops. -
1 The screen is flickering. -
* Check if the camera is facing directly into sunlight or fluorescent light.
* Check if an auto iris lens is being used.
* Check the connection of the lens connector cable.
-
1 ㅇㅇㅇㅇㅇㅇ -
ㅇㅇㅇㅇㅇㅇㅇㅇㅇㅇㅇ
-
1 ㄱㄱㄱㄱㄱㄱ -
ㄱㄱㄱㄱㄱㄱㄱㄱ
